|
ipmitool version 1.8.11
usage: ipmitool [options...] <command>
-h This help
-V Show version information
-v Verbose (can use multiple times)
-c Display output in comma separated format
-d N Specify a /dev/ipmiN device to use (default=0)
-I intf Interface to use
-H hostname Remote host name for LAN interface
-p port Remote RMCP port [default=623]
-U username Remote session username
-f file Read remote session password from file
-S sdr Use local file for remote SDR cache
-a Prompt for remote password
-Y Prompt for the Kg key for IPMIv2 authentication
-e char Set SOL escape character
-C ciphersuite Cipher suite to be used by lanplus interface
-k key Use Kg key for IPMIv2 authentication
-y hex_key Use hexadecimal-encoded Kg key for IPMIv2 authentication
-L level Remote session privilege level [default=ADMINISTRATOR]
Append a '+' to use name/privilege lookup in RAKP1
-A authtype Force use of auth type NONE, PASSWORD, MD2, MD5 or OEM
-P password Remote session password
-E Read password from IPMI_PASSWORD environment variable
-K Read kgkey from IPMI_KGKEY environment variable
-m address Set local IPMB address
-b channel Set destination channel for bridged request
-t address Bridge request to remote target address
-B channel Set transit channel for bridged request (dual bridge)
-T address Set transit address for bridge request (dual bridge)
-l lun Set destination lun for raw commands
-o oemtype Setup for OEM (use 'list' to see available OEM types)
-O seloem Use file for OEM SEL event descriptions
Interfaces:
open Linux OpenIPMI Interface [default]
imb Intel IMB Interface
lan IPMI v1.5 LAN Interface
lanplus IPMI v2.0 RMCP+ LAN Interface
Commands:
raw Send a RAW IPMI request and print response
i2c Send an I2C Master Write-Read command and print response
spd Print SPD info from remote I2C device
lan Configure LAN Channels (lan 채널에 대해서 설정)
chassis Get chassis status and set power state (샤시상태와 전원관리)
power Shortcut to chassis power commands (샤시명령의 단축 명령어)
event Send pre-defined events to MC
mc Management Controller status and global enables
sdr Print Sensor Data Repository entries and readings
sensor Print detailed sensor information
fru Print built-in FRU and scan SDR for FRU locators
(Fiele replace unit의 약자이며 보통 메모리 정보나 메인보드 정보를 제공)
gendev Read/Write Device associated with Generic Device locators sdr
sel Print System Event Log (SEL)
(System Event Log 약자로 시스템에 event 로그를 보여준다. 보통 서버가 하드웨어적으로 문제가 발생하면 발생하며 하드웨어 점검할때 사용)
pef Configure Platform Event Filtering (PEF)
sol Configure and connect IPMIv2.0 Serial-over-LAN
tsol Configure and connect with Tyan IPMIv1.5 Serial-over-LAN
isol Configure IPMIv1.5 Serial-over-LAN
user Configure Management Controller users
channel Configure Management Controller channels
session Print session information
sunoem OEM Commands for Sun servers
kontronoem OEM Commands for Kontron devices
picmg Run a PICMG/ATCA extended cmd
fwum Update IPMC using Kontron OEM Firmware Update Manager
firewall Configure Firmware Firewall
shell Launch interactive IPMI shell
exec Run list of commands from file
set Set runtime variable for shell and exec
hpm Update HPM components using PICMG HPM.1 file
ekanalyzer run FRU-Ekeying analyzer using FRU files | 
